SPD Type 2, 3-phase, varistors, FM
L1, L2, L3, N-PE, for 3-phase TN-S networks Backup fuse max. 160A Type 2 surge arrester, 4 varistors, for 3-phase TN-S networks, telecommunications connector 7P.25.8.275.1020
Available immediately
SPD Type 2, single-phase, varistor
Type 2 surge arrester, varistor, for single-phase networks between L-N, L-PE, or 7P.21.8.275.1020
Available immediately
Combination Arrester Type 1+2 for Three-Phase TN-S Networks
Type 1+2 lightning and surge arresters, 4+0 varistor and spark gap 7P.05.8.275.1012
Available immediately
Combined arrester, Type 1+2, 3-phase
Type 1+2 surge arrester, varistor and spark gap, for 3-phase TN-S-Ne 7P.05.8.260.1025
Available immediately
Combined arrester, Type 1+2, 3-phase
Type 1+2 SPD with“Low Up” protection level - for 3-phase low-voltage systems• Surge arrester for 230/400 V networksto prevent overvoltages caused bydirect or indirect lightning strikes• For installation at the boundaries of zonesLPZ 0 and LPZ 1• Very low Up to protect sensitive devices• Varistor fault indication via "Red" in theviewing window• Varistor status feedback via plug 07P.01(included in the package)• Complies with EN 61643-11:2012• For 35 mm mounting rail (EN 60715)7P.15.8.275.1012 Type 1+2 SPD for 3-phaseTN-S networks (with N)• Varistor protection between L1, L2, L3, N-PE• Replaceable varistor modules Type 1+2 surge arrester, varistor between L1, L2, L3, N-PE, for 3-phase 7P.15.8.275.1012
Available immediately
Combined arrester, Type 1+2, 3-phase
Type 1+2 SPD with“Low Up” protection level - for 3-phase low-voltage systems• Surge arrester for 230/400 V networksto prevent overvoltages caused bydirect or indirect lightning strikes• For installation at the boundaries of zonesLPZ 0 and LPZ 1• Very low Up to protect sensitive devices• Varistor fault indication by "Red" in theviewing window• Varistor status feedback via plug 07P.01(included in the package)• Complies with EN 61643-11:2012• For 35 mm mounting rail (EN 60715)7P.14.8.275.1012 Type 1+2 SPD for 3-phaseTT and TN-S networks (with N)• Varistor between L1, L2, L3-N + spark gapbetween N-PE• Replaceable varistor modules• Non-replaceable spark gap surge arrester Type 1+2, varistor between L1, L2, L3-N and spark gap, 7P.14.8.275.1012
Delivery time on requestk
SPD Type 2+3, data line
SPD Type 2+3 - Combination of coarse and precision protection for 2-wire data linesand signal networks• Suitable for protecting 2-wire data linesand telecommunications lines whilemaintaining the shielding• Provides optimalprecision protection in a series connection against longitudinal surges (conductor-PE) and cross-line surges (wire-to-wire)• Complies with EN 61643-21+A1,A2:2013,EN/IEC 61643-21+A1,A2:2012 C2,C3• For 35 mm mounting rail (EN 60715)7P.62.9.036.0005• Suitable for protecting fire alarm systems,telecommunications interfaces and2-wire data lines Type 2+3 surge arresters, for protecting fire alarm systems, bus and data l 7P.62.9.036.0005
Delivery time on requestk
SPD Type 2, 3-phase, varistors, FM
Type 2 SPD (Surge Protective Device) -for photovoltaic applications• Type 2 surge arrester for protecting theDC side with a UCPV of 750 V to 1500 V DC• Protects equipment from inducedSurge voltages and voltage spikes7P.23.9.000.x015, UCPV = 1020 V DC• Varistor fault indication via "Red" in theViewing window• Varistor status feedback via connector 07P.01(included in the package, depending on theVersion)• Replaceable modules• Complies with EN 61643-31, IEC 61643-31• For 35 mm mounting rail (EN 60715) Type 2 surge arrester, for photovoltaic systems up to 1020 V DC, rated discharge capacity 7P.23.9.000.1015
Delivery time on requestk
Combined Type 1+2 arresters, for PV systems, DC
SPD Type 1+2 surge arrester for Photovoltaic applications• Surge arrester for protectingPV systems with a UCPV of up to 1500 V DC• Protects equipment from overvoltages caused bydirect lightning strikes and inducedsurge voltages• Suitable for lightning protection systems (LPS) withinsufficient separation distance7P.13.9.500.x006, UCPV = 1500 V DCVaristor fault indication via "red" in theviewing window• Varistor status feedback via connector07P.01 (included in the package, depending onthe version)• Compact solution, can be mounted upside down• Complies with EN 61643-31, IEC 61643-31• For 35 mm mounting rail (EN 60715) Type 1 + 2 lightning and surge arrester, for photovoltaic systems up to 1500 V D 7P.13.9.500.1006
Delivery time on requestk
Combined arrester Type 1+2, single-phase
Type 1+2 SPD with “Low Up” protection level - for single- and three-phaselow-voltage systems• Surge arresters for 230/400 V networksto prevent overvoltages caused bydirect or indirect lightning strikes• For installation at the boundaries of zonesLPZ 0 and LPZ 1• Very low Up to protect sensitive devicesprotect• Varistor fault indication by \"Red\" in theviewing window• Varistor status feedback via connector 07P.01(included in the package)• Interchangeable varistor and spark gapmodules• Complies with EN 61643-11:2012• For 35 mm mounting rail (EN 60715)7P.12.8.275.1012 Type 1+2 SPD for single-phase TT-and TN-S systems (with N).• Varistor between L and N + spark gapbetween N and PE for single-phase networks• Interchangeable varistor and spark gapType 1+2 surge arrester modules, varistor between L and N and spark gap, for single-phase 7P.12.8.275.1012
Delivery time on requestk
Type 3 SPD, single-phase, varistor + spark gap
Type 3 SPD, surge arrester for TT and TN-S networksSingle-phase application for outlets orcable ducts• Protects electrical and electronic devices thatare sensitive to surge voltages• Complies with EN 61643-11:20127P.32.8.275.0005• Combination of varistor and spark gapto prevent ground fault currents• Varistor and spark gap with very lowprotection level Up• IP 65 protection rating• 3 connection leads, 150 mm long, for easywiring Type 3 surge arrester, varistor between L-N and spark gap between N- 7P.32.8.275.0005
Delivery time on requestk
Ethernet, RJ45 surge protection for
Surge protection for data lines Ethernet Cat. 6• Suitable for Ethernet, PoE (Power over Ethernet)and data transmission systems up to 250 MHz• Protection of all wire pairs with minimalAttenuation• Aluminum housing and shielded RJ45Jacks• Accessories included forEasy installation near thedevice to be protected, LPZ 2 to LPZ 3 (SPD Type 3)• Complies with EN 61643-21• For 35 mm mounting rail (EN 60715) Surge protection for Ethernet Cat. 6 data cables 7P.68.9.060.0600
Delivery time on requestk
Combined arrester, Type 1+2, 3-phase
Type 1+2 SPD with “Low Up” protection level - for single- and three-phaselow-voltage systems• Surge arresters for 230/400 V networksto prevent overvoltages caused bydirect or indirect lightning strikes• For installation at the boundaries of zonesLPZ 0 and LPZ 1• Very low Up to protect sensitive devices• Varistor fault indication via "Red" in theviewing window• Varistor status feedback via connector 07P.01(included in the package)• Interchangeable varistor and spark gapmodules• Complies with EN 61643-11:2012• For 35 mm mounting rail (EN 60715)7P.13.8.275.1012 Type 1+2 SPD for 3-phaseTN-C networks (with PEN)• Varistor protection between L1, L2, L3-PEN for3-phase networks• Replaceable varistor modules Type 1+2 surge arrester, varistor between L1, L2, L3-PEN, for 3-phase T 7P.13.8.275.1012
Delivery time on requestk
SPD Type 2, single-phase, varistor + spark gap, FM
Type 2 SPD - for 1- and 3-phase AC networks and for DC networks• Surge arresters, suitable for AC and DC-networks to protect equipment against inducedsurge voltages and voltage spikes• For installation at zone boundariesLPZ 1 to LPZ 2 or higher• Varistor fault indication via "Red" in theviewing window• Varistor status feedback via connector 07P.01(included in the package, depending on theversion)• Interchangeable varistor and spark gap modules• Complies with EN 61643-11:2012• For 35 mm mounting rail (EN 60715)7P.22.8.275.x020 Type 2 SPD for single-phase TT-and TN-S networks (with N)• Varistor protection L-N + spark gap protection N-PE• Interchangeable varistor and spark gap modules Type 2 surge arresters, varistor and spark gap, for single-phase TN-S and 7P.22.8.275.1020
Delivery time on requestk
Type 3 SPD, single-phase, varistor + spark gap
Type 3 SPD, surge arrester for TT and TN-S networksSingle-phase application for outlets,Cable ducts or for mounting on mounting rails• Protects electrical and electronic devicesthat are sensitive to surge voltagesare• Combination of varistor and spark gapto prevent ground fault currents• Complies with EN 61643-11:20127P.36.8.275.2003• Surge protection for ACOutlets• Varistor and spark gap with very lowProtection level UP• 3 connection leads, 150 mm long, for easyWiring for Type 3 surge arrester, varistor between L and N and spark gap between N- 7P.36.8.275.2003
Delivery time on requestk
SPD Type 2+3, data line
SPD Type 2+3 - Combination of coarse and precision protection for 2-wire data linesand signal networks• Suitable for protecting 2-wire dataand telecommunications lines whilemaintaining shielding• Provides optimalprecision protection in a series connection against longitudinal surges (conductor-PE) and transverse surges (conductor-conductor)• Complies with EN 61643-21+A1,A2:2013,EN/IEC 61643-21+A1,A2:2012 C2,C3• For 35 mm mounting rail (EN 60715)7P.62.9.009.0485• Suitable for protecting RS485-data lines of inverters, PLCs,energy meters, or other interfaces Type 2+3 surge arrester for protection of RS485 data lines 7P.62.9.009.0485
Delivery time on requestk
Combined arrester, Type 1+2, 3-phase
Type 1+2 surge arrester, varistor and spark gap, for 3-phase TN-S and 7P.04.8.260.1025
Delivery time on requestk
SPD Type 2, 3-phase, varistors + spark gap, FM
Type 2 SPD (Surge Protective Device) -for 3-phase power systems• Surge arrester, suitable for230/400 V power systems for protecting equipmentagainst induced overvoltages andVoltage spikes• For installation at zone boundariesLPZ 1 to LPZ 2 or higher• Varistor fault indication via "Red" in theViewing window• Varistor status feedback via connector07P.01 (included in the package, depending on theversion)• Interchangeable varistor and spark gapmodules• Complies with EN 61643-11:2012• For 35 mm mounting rail (EN 60715)7P.24.8.275.x020 Type 2 SPD for 3-phase TTand TN-S networks (with N)• Varistor between L1, L2, L3 + spark gapbetween N and PE• Interchangeable varistor and spark gapType 2 and 3 surge protection modules with varistors and spark gaps (N-PE), for 3-phase 7P.24.8.275.1020
Delivery time on requestk
SPD Type 2, single-phase, 2 varistors, FM
Type 2 SPD - for 1- and 3-phase AC networks and for DC networks• Surge arresters, suitable for AC and DC-networks to protect equipment against inducedsurge voltages and voltage spikes• For installation at the boundaries of zonesLPZ 1 to LPZ 2 or higher• Varistor fault indication via "Red" in theviewing window• Varistor status feedback via plug 07P.01(included in the package, depending on theversion)• Replaceable varistor and spark gap modules• Complies with EN 61643-11:2012• For 35 mm mounting rail (EN 60715) Type 2 surge arrester, varistor between L, N-PE, for single-phase TN-S networks 7P.27.8.275.1020
Delivery time on requestk
Combined Type 1+2 arresters, for PV systems, DC
SPD Type 1+2 surge arrester for Photovoltaic applications• Surge arrester for protectingPV systems with a UCPV of up to 1500 V DC• Protects equipment from overvoltages caused bydirect lightning strikes and inducedsurge voltages• Suitable for lightning protection systems (LPS) withinsufficient separation distance7P.13.9.000.x006, UCPV = 1050 V DCVaristor fault indication via "red" in theviewing window• Varistor status feedback via connector07P.01 (included in the package, depending onthe version)• Compact solution, can be mounted upside down• Complies with EN 61643-31, IEC 61643-31• For 35 mm mounting rail (EN 60715) Type 1 + 2 lightning and surge arrester, for photovoltaic systems up to 1050 V D 7P.13.9.000.1006
Delivery time on requestk
Type 3 SPD, single-phase, varistor + spark gap
Type 3 SPD, surge arrester for TT and TN-S networksSingle-phase application for outlets,Cable ducts or for mounting on mounting rails• Protects electrical and electronic devicesthat are sensitive to surge voltagesare• Combination of varistor and spark gapto prevent ground fault currents• Complies with EN 61643-11:20127P.37.8.275.1003• Varistor and spark gap with very lowProtection level UP• Series connection to a load of up to 16 A• For 35 mm mounting rail (EN 60715)• 17.5 mm wide Type 3 surge arrester, varistor between L and N and spark gap between N and 7P.37.8.275.1003
Delivery time on requestk
Combined arrester, Type 1+2, 3-phase
SPD Type 1+2 Surge Arrester High discharge capacity without residual current—for3-phase low-voltage systems (230/400 V)• Surge arrester, suitable forlow-voltage systems, for the protection ofequipment against overvoltages caused by directlightning strikes, induced overvoltagesand switching overvoltages• Combination of a varistor and a high-performance—spark gaps (GDT gas discharge tubes) ensure:- High discharge surge current- No leakage current- No follow-current• Very low residual voltage• Replaceable modules• Can be mounted upside down (with 2-wayterminal labeling and new mounting systemfor the replaceable module)• Varistor fault indication via "Red" in theviewing window• Double-cage clamps• Status feedback via connector 07P.01 (in the(Included in package): Function/fault indicator• Complies with EN 61643-11:2012• For 35 mm mounting rail (EN 60715)7P.03.8.260.1025 Type 1+2 SPD for 3-phaseTN-C networks (with PEN). Varistor+ spark gap between L1,L2, L3-PEN Type 1+2 surge arrester, varistor and spark gap, for 3-phase TN-C networks 7P.03.8.260.1025
Delivery time on requestk
Do you have specific requirements?
We’ll provide you with personalized advice and work with you to find the right solution for your application.