Installation contactor
Control contactors with 2 or 4 contacts for 25 A- Complies with EN 45545-2:2020(Fire behavior of materials andcomponents on rail vehicles),complies with EN 61373 (Vibration and Shock, Cat.1, Class B) and EN 50155 (cold, dry, anddamp heat, temperature class OT4/ST1)- Width: 17.5 or 35 mm- Normally open contact with contact gap ≥ 3 mm- Continuous operation for coil and contacts- AC/DC control, hum-free (with varistor)- Safe isolation (reinforced insulation)between the coil and the contacts- Mechanical position indicator and LED indicator- Complies with EN 61095: 2009- Auxiliary switches are available, quick mounting onthe installation contactors (1 NO contact + 1 NC contact or2 normally open contacts)- For 35 mm mounting rail (EN 60715), contactor for side-by-side mounting, 2 normally open contacts, 25 A, coil 230 V AC/DC, LED indicator 22.32.0.230.4320
Available immediately
Installation contactor
Control contactors with 2 or 4 contacts for 25 A• Complies with EN 45545-2:2020(Fire behavior of materials andComponents on rail vehicles),complies with EN 61373 (Vibration and Shock, Cat.1, Class B) and EN 50155 (cold, dry, anddamp heat, temperature class OT4/ST1)• Width: 17.5 or 35 mm• Normally open contacts with a contact gap of ≥ 3 mm• Continuous operation for coil and contacts• AC/DC control, hum-free (with varistor)• Safe isolation (reinforced insulation)between the coil and the contacts• Mechanical position indicator and LED indicator• Complies with EN 61095: 2009• Auxiliary contacts are available,Quick installation on the installation contactors(1 NO contact + 1 NC contact or 2 NO contacts)• For 35 mm mounting rail (EN 60715) contactor for side-by-side mounting, 4 normally open contacts, 25 A, coil 230 V AC/DC, LED indicator 22.34.0.230.4320
Available immediately
Installation contactor
Installation contactors with 2 contacts for 25 A- Contact type: Bridge contacts- Contact opening:Normally open contacts ≥ 3 mm, normally closed contacts ≥ 1.5 mm- Via internal wiring for AC/DC control(no-hum)- Input protection circuit: varistor- Reinforced insulation between the coil and contacts- Mechanical indicator and LED indicator, On-Auto-Off switch (optional)- Contact material: AgNi or AgSnO 2- Complies with EN 61095: 2009-11- Expandable with 6 A auxiliary switches, 1 normally open contact + 1 normally closed contact or 2 normally open contacts (quickly mounted on the side of the installation contactorto be mounted)- Complies with EN 45545-2 + A1: 2016(Fire behavior of materials andcomponents on rail vehicles)- For 35 mm mounting rail (EN 60715) contactor for in-line installation, 2 normally open contacts 25 A, coil 230 V AC/DC, On-Auto-Off - Scha 22.32.0.230.4340
Available immediately
Installation contactor
Control contactors with 2 or 4 contacts for 25 A• Complies with EN 45545-2:2020(Fire behavior of materials andComponents on rail vehicles),complies with EN 61373 (Vibration and Shock, Cat.1, Class B) and EN 50155 (cold, dry, anddamp heat, temperature class OT4/ST1)• Width: 17.5 or 35 mm• Normally open contacts with a contact gap of ≥ 3 mm• Continuous operation for coil and contacts• AC/DC control, hum-free (with varistor)• Safe isolation (reinforced insulation)between the coil and the contacts• Mechanical position indicator and LED indicator• Complies with EN 61095: 2009• Auxiliary contacts are available,Quick installation on the installation contactors(1 NO contact + 1 NC contact or 2 NO contacts)• For 35 mm mounting rail (EN 60715), contactor for side-by-side mounting, 2 normally open contacts, 25 A, coil 24 V AC/DC, LED indicator 22.32.0.024.4320
Available immediately
Installation contactor
Installation contactors with 2 contacts for 25 A- Contact type: Bridge contacts- Contact opening:Normally closed contacts ≥ 3 mm, normally open contacts ≥ 1.5 mm- Via internal wiring for AC/DC control (hum-free)- Input protection circuit: varistor- Reinforced insulation between the coil and contacts- Mechanical indicator and LED indicator, On-Auto-Off switch (optional)- Contact material: AgNi or AgSnO 2- Complies with EN 61095: 2009-11- Expandable with 6 A auxiliary switches, 1 NO + 1 NC or 2 NC (quickly attachable to the side of the installation contactor)- Complies with EN 45545-2 + A1: 2016(Fire behavior of materials andcomponents on rail vehicles)- For 35 mm mounting rail (EN 60715) contactor for in-line mounting, 1 normally closed contact and 1 normally open contact 25 A, coil 230 V AC/DC, On-Au 22.32.0.230.4540
Available immediately
Installation contactor
Installation contactor with 4 contacts for 25 A• Contact type: bridge contacts• Contact opening:Normally open contacts ≥ 3 mm, normally closed contacts ≥ 1.5 mm• Via internal wiring for AC/DC-control (hum-free)• Input protection circuit: varistor• Reinforced insulation between coil andcontacts• Mechanical indicator and LED indicator,On-Auto-Off switch (optional)• Contact material: AgNi or AgSnO 2• Complies with EN 61095: 2009-11• Expandable with 6 A auxiliary switch,1 normally open contact + 1 normally closed contact or 2 normally open contacts (side-mountedfor quick attachment to the installation contactor)• Complies with EN 45545-2 + A1: 2016(Fire behavior of materials andcomponents on rail vehicles)• 35 mm wide• For 35 mm mounting rail (EN 60715) contactor for series installation, 4 normally open contacts 25 A, coil 230 V AC/DC, On-Auto-Off - Scha 22.34.0.230.4340
Available immediately
Installation contactor
Contactor for in-line installation, 2 normally open contacts, 25 A, coil 12 V AC/DC, LED indicator 22.32.0.012.4320
Available immediately
Installation contactor
Control contactors with 2 or 4 contacts for 25 A• Complies with EN 45545-2:2020(Fire behavior of materials andcomponents on rail vehicles),EN 61373 (vibration and shock, Cat.1, Class B) and EN 50155 (cold, dry, anddamp heat, temperature class OT4/ST1)• Width: 17.5 or 35 mm• Normally open contacts with contact gap ≥ 3 mm• Continuous operation for coil and contacts• AC/DC control, hum-free (with varistor)• Safe isolation (reinforced insulation)between coil and contacts• Mechanical position indicator and LED indicator• Complies with EN 61095: 2009• Auxiliary contacts are available,quick installation on the installation contactors(1 NO contact + 1 NC contact or 2 NO contacts)• For 35 mm mounting rail (EN 60715) contactor for side-by-side mounting, 1 NC contact and 1 NO contact 25 A, coil 24 V AC/DC, LED indicator 22.32.0.024.4520
Available immediately
Installation contactor
Installation contactors with 4 contactsfor 40 A or 63 A• Contact type: bridge contacts• Contact opening:Normally open contacts ≥ 3 mm, normally closed contacts ≥ 3 mm• Via internal wiring for AC/DC-Control (hum-free)• Input protection circuit: varistor• Reinforced insulation between the coil andContacts• Mechanical indicator• Contact material: AgSnO2• Versions with mirror contacts, compliantin accordance with EN 60947-4-1, Annex F• Expandable with 6 A auxiliary switches according toEN 60947-5-1 (mechanically linkedContacts with the installation contactors) in theVersions: 1 NO contact + 1 NC contact or2 normally open contacts• Complies with EN 61095:2009• 53.5 mm wide• For 35 mm mounting rail (EN 60715) contactor for side-by-side mounting, 4 normally open contacts 63 A, coil 24 V AC/DC, mechanical indicator 22.64.0.024.4310
Available immediately
Installation contactor
Installation contactors with 2 contacts for 25 A• Contact type: bridge contacts• Contact opening:Normally open contact ≥ 3 mm, normally closed contact ≥ 1.5 mm• Via internal wiring for AC/DC-Control (hum-free)• Input protection circuit: varistor• Reinforced insulation between the coil andcontacts• Mechanical indicator and LED indicator,On-Auto-Off switch (optional)• Contact material: AgNi or AgSnO 2• Comply with EN 61095: 2009-11• Expandable with 6 A auxiliary switch,1 normally open contact + 1 normally closed contact or 2 normally open contacts (side-mountedfor quick attachment to the installation contactor)• Comply with EN 45545-2 + A1: 2016(Fire behavior of materials andcomponents on rail vehicles)• For 35 mm mounting rail (EN 60715) contactor for side-by-side mounting, 2 normally open contacts 25 A, coil 24 V AC/DC, On-Auto-Off switch 22.32.0.024.4340
Available immediately
Installation contactor
Installation contactors with 2 or 4 contactsfor 32 A• Contact type: bridge contacts• Contact opening:Normally open contacts ≥ 3 mm, normally closed contacts ≥ 3 mm• Via internal wiring for AC/DC -Control (hum-free)• Input protection circuit: varistor• Reinforced insulation between the coil andcontacts• Mechanical indicator• Versions with mirror contacts, compliantwith EN 60947-4-1, Annex F• Contact material AgNi• Complies with EN 61095: 2009• For 35 mm mounting rail (EN 60715) contactor for side-by-side mounting, 4 NO contacts 32 A, coil 230 V AC/DC, mechanical indicator 22.74.0.230.1310
Available immediately
Installation contactor
Installation contactor with 4 contacts for 25 A• Contact type: bridge contacts• Contact opening:Normally open contacts ≥ 3 mm, normally closed contacts ≥ 1.5 mm• Via internal wiring for AC/DC-control (hum-free)• Input protection circuit: varistor• Reinforced insulation between coil andcontacts• Mechanical indicator and LED indicator,On-Auto-Off switch (optional)• Contact material: AgNi or AgSnO 2• Complies with EN 61095: 2009-11• Expandable with 6 A auxiliary switch,1 normally open contact + 1 normally closed contact or 2 normally open contacts (side-mountedfor quick attachment to the installation contactor)• Complies with EN 45545-2 + A1: 2016(Fire behavior of materials andcomponents on rail vehicles)• 35 mm wide• For 35 mm mounting rail (EN 60715) contactor for series installation, 4 normally open contacts 25 A, coil 24 V AC/DC, On-Auto-Off - swit 22.34.0.024.4340
Available immediately
Installation contactor
Control contactors with 2 or 4 contacts for 25 A• Complies with EN 45545-2:2020(Fire behavior of materials andcomponents on rail vehicles),complies with EN 61373 (vibration and shock, Cat.1, Class B) and EN 50155 (cold, dry, anddamp heat, temperature class OT4/ST1)• Width: 17.5 or 35 mm• Normally open contacts with a contact gap of ≥ 3 mm• Continuous operation for coil and contacts• AC/DC control, hum-free (with varistor)• Safe isolation (reinforced insulation)between the coil and the contacts• Mechanical position indicator and LED indicator• Complies with EN 61095: 2009• Auxiliary contacts are available,quick installation on the installation contactors(1 NO contact + 1 NC contact or 2 NO contacts)• For 35 mm mounting rail (EN 60715) contactor for side-by-side mounting, 2 normally open contacts, 25 A, coil 24 V AC/DC, LED indicator 22.32.0.024.4420
Available immediately
Sealable installation contactors 22, input: 230V AC / 220V DC
Installation contactor with 4 contacts for 25 A• Contact type: bridge contacts• Contact opening:Normally open contacts ≥ 3 mm, normally closed contacts ≥ 1.5 mm• Via internal wiring for AC/DC-control (hum-free)• Input protection circuit: varistor• Reinforced insulation between coil andcontacts• Mechanical indicator and LED indicator,On-Auto-Off switch (optional)• Contact material: AgNi or AgSnO 2• Complies with EN 61095: 2009-11• Expandable with 6 A auxiliary switch,1 normally open contact + 1 normally closed contact or 2 normally open contacts (side-mountedfor quick attachment to the installation contactor)• Complies with EN 45545-2 + A1: 2016(Fire behavior of materials andcomponents on rail vehicles)• 35 mm wide• For 35 mm mounting rail (EN 60715) 4 NO, 25A / 250V AC, AgNi, mech. indicator 22.34.0.230.1410
Available immediately
Installation Contactors Series 22, Input: 230 V AC / 220 V DC
Installation contactors with 2 or 4 contactsfor 32 A• Contact type: bridge contacts• Contact opening:Normally open contacts ≥ 3 mm, normally closed contacts ≥ 3 mm• Via internal wiring for AC/DC -Control (hum-free)• Input protection circuit: varistor• Reinforced insulation between the coil andcontacts• Mechanical indicator• Versions with mirror contacts, compliantwith EN 60947-4-1, Annex F• Contact material AgNi• Complies with EN 61095: 2009• For 35 mm mounting rail (EN 60715) 1S+1Ö, 32 A / 250 V AC, AgNi, mechanical indicator 22.72.0.230.1510
Available immediately
Installation contactor
Control contactors with 2 or 4 contacts for 25 A- Complies with EN 45545-2:2020(Fire behavior of materials andcomponents on rail vehicles),complies with EN 61373 (vibration and shock, Cat.1, Class B) and EN 50155 (cold, dry, anddamp heat, temperature class OT4/ST1)- Width: 17.5 or 35 mm- Normally open contact with contact gap ≥ 3 mm- Continuous operation for coil and contacts- AC/DC control, hum-free (with varistor)- Safe isolation (reinforced insulation)between the coil and the contacts- Mechanical position indicator and LED indicator- Complies with EN 61095: 2009- Auxiliary contacts are available; quick mounting on installation contactors (1 NO contact + 1 NC contact or 2 NC contacts)- For 35 mm mounting rail (EN 60715) contactor for side-by-side mounting, 1 normally closed contact and 1 normally open contact 25 A, coil 230 V AC/DC, LED-- 22.32.0.230.4520
Available immediately
Installation contactor
Control contactors with 2 or 4 contacts for 25 A• Complies with EN 45545-2:2020(Fire behavior of materials andcomponents on rail vehicles),complies with EN 61373 (vibration and shock, Cat.1, Class B) and EN 50155 (cold, dry, anddamp heat, temperature class OT4/ST1)• Width: 17.5 or 35 mm• Normally open contacts with a contact gap of ≥ 3 mm• Continuous operation for coil and contacts• AC/DC control, hum-free (with varistor)• Safe isolation (reinforced insulation)between the coil and the contacts• Mechanical position indicator and LED indicator• Complies with EN 61095: 2009• Auxiliary contacts are available,quick installation on the installation contactors(1 NO contact + 1 NC contact or 2 NO contacts)• For 35 mm mounting rail (EN 60715) contactor for side-by-side mounting, 2 normally open contacts and 2 normally closed contacts, 25 A, coil 230 V AC/DC, LED-A 22.34.0.230.4620
Available immediately
Installation contactor
Installation contactors with 4 contacts for 40 A or 63 A• Contact type: bridge contacts• Contact opening:Normally open contacts ≥ 3 mm, normally closed contacts ≥ 3 mm• Via internal wiring for AC/DC-Control (hum-free)• Input protection circuit: varistor• Reinforced insulation between the coil andContacts• Mechanical indicator• Contact material: AgSnO2• Versions with mirror contacts, compliantin accordance with EN 60947-4-1, Annex F• Expandable with 6 A auxiliary switches according toEN 60947-5-1 (mechanically linkedContacts with the installation contactors) in theVersions: 1 NO contact + 1 NC contact or2 normally open contacts• Complies with EN 61095:2009• 53.5 mm wide• For 35 mm mounting rail (EN 60715), contactor for side-by-side mounting, 4 normally open contacts, 40 A, coil 24 V AC/DC, mechanical indicator 22.44.0.024.4310
Available immediately
Installation contactor
Installation contactors with 4 contactsfor 40 A or 63 A• Contact type: bridge contacts• Contact opening:Normally open contacts ≥ 3 mm, normally closed contacts ≥ 3 mm• Via internal wiring for AC/DC-Control (hum-free)• Input protection circuit: varistor• Reinforced insulation between the coil andContacts• Mechanical indicator• Contact material: AgSnO2• Versions with mirror contacts, compliantin accordance with EN 60947-4-1, Annex F• Expandable with 6 A auxiliary switches according toEN 60947-5-1 (mechanically linkedContacts with the installation contactors) in theVersions: 1 NO contact + 1 NC contact or2 normally open contacts• Complies with EN 61095:2009• 53.5 mm wide• For 35 mm mounting rail (EN 60715), contactor for side-by-side mounting, 4 NO contacts, 40 A, coil 230 V AC/DC, mechanical indicator 22.44.0.230.4410
Available immediately
Installation contactor
Control contactors with 2 or 4 contacts for 25 A- Complies with EN 45545-2:2020(Fire behavior of materials andcomponents on rail vehicles),complies with EN 61373 (Vibration and Shock, Cat.1, Class B) and EN 50155 (cold, dry, anddamp heat, temperature class OT4/ST1)- Width: 17.5 or 35 mm- Normally open contact with contact gap ≥ 3 mm- Continuous operation for coil and contacts- AC/DC control, hum-free (with varistor)- Safe isolation (reinforced insulation)between the coil and the contacts- Mechanical position indicator and LED indicator- Complies with EN 61095: 2009- Auxiliary contacts are available; quick mounting on the installation contactors(1 NO contact + 1 NC contact or 2 NO contacts)- For 35 mm mounting rail (EN 60715) contactor for side-by-side mounting, 2 normally closed contacts, 25 A, coil 230 V AC/DC, LED indicator 22.32.0.230.4420
Available immediately
Installation contactor
Control contactors with 2 or 4 contacts for 25 A• Complies with EN 45545-2:2020(Fire behavior of materials andcomponents on rail vehicles),complies with EN 61373 (vibration and shock, Cat.1, Class B) and EN 50155 (cold, dry, anddamp heat, temperature class OT4/ST1)• Width: 17.5 or 35 mm• Normally open contacts with a contact gap of ≥ 3 mm• Continuous operation for coil and contacts• AC/DC control, hum-free (with varistor)• Safe isolation (reinforced insulation)between the coil and the contacts• Mechanical position indicator and LED indicator• Complies with EN 61095: 2009• Auxiliary contacts are available,quick installation on the installation contactors(1 NO contact + 1 NC contact or 2 NO contacts)• For 35 mm mounting rail (EN 60715) contactor for side-by-side mounting, 1 normally open contact and 3 normally closed contacts, 25 A, coil 230 V AC/DC, LED-A 22.34.0.230.4720
Available immediately
Installation contactor
Installation contactors with 4 contactsfor 40 A or 63 A• Contact type: bridge contacts• Contact opening:Normally open contacts ≥ 3 mm, normally closed contacts ≥ 3 mm• Via internal wiring for AC/DC-control (hum-free)• Input protection circuit: varistor• Reinforced insulation between the coil andcontacts• Mechanical indicator• Contact material: AgSnO2• Versions with mirror contacts, compliantwith EN 60947-4-1, Annex F• Expandable with 6 A auxiliary switches according toEN 60947-5-1 (mechanically linkedcontacts with the installation contactors) in theversions 1 NO contact + 1 NC contact or2 normally open contacts• Complies with EN 61095:2009• 53.5 mm wide• For 35 mm mounting rail (EN 60715) contactor for side-by-side mounting, 4 NO contacts, 63 A, coil 230 V AC/DC, mechanical indicator 22.64.0.230.4310
Available immediately
Installation contactor
Control contactors with 2 or 4 contacts for 25 A• Complies with EN 45545-2:2020(Fire behavior of materials andcomponents on rail vehicles),complies with EN 61373 (Vibration and Shock, Cat.1, Class B) and EN 50155 (cold, dry, anddamp heat, temperature class OT4/ST1)• Width: 17.5 or 35 mm• Normally open contacts with a contact gap of ≥ 3 mm• Continuous operation for coil and contacts• AC/DC control, hum-free (with varistor)• Safe isolation (reinforced insulation)between the coil and the contacts• Mechanical position indicator and LED indicator• Complies with EN 61095: 2009• Auxiliary contacts are available,quick installation on the installation contactors(1 NO contact + 1 NC contact or 2 NO contacts)• For 35 mm mounting rail (EN 60715) contactor for side-by-side mounting, 4 normally open contacts, 25 A, coil 24 V AC/DC, LED indicator 22.34.0.024.4320
Available immediately
Installation contactor
Installation contactors with 4 contactsfor 40 A or 63 A• Contact type: bridge contacts• Contact opening:Normally open contacts ≥ 3 mm, normally closed contacts ≥ 3 mm• Via internal wiring for AC/DC-control (hum-free)• Input protection circuit: varistor• Reinforced insulation between coil andcontacts• Mechanical indicator• Contact material: AgSnO2• Versions with mirror contacts, compliantwith EN 60947-4-1, Annex F• Expandable with 6 A auxiliary switches according toEN 60947-5-1 (mechanically linkedcontacts with the installation contactors) in theversions 1 NO contact + 1 NC contact or2 NO contacts• Comply with EN 61095:2009• 53.5 mm wide• For 35 mm mounting rail (EN 60715) contactor for side-by-side mounting, 4 NO contacts 40 A, coil 230 V AC/DC, mechanical indicator 22.44.0.230.4310
Available immediately
Do you have specific requirements?
We’ll provide you with personalized advice and work with you to find the right solution for your application.