Position Switches from Eaton

Industrial roller lever limit switch with a bright yellow wheel at the tip of a shiny metal arm. The arm is attached to a black, rectangular base, next to which is a bare metal coil spring. Cutout against a white background.

Adjustable roller lever, d=40mm, rubber, plastic

Eaton Moeller® Series LS Adjustable Roller Lever, T=40mm, rubber. Y7-266130

Item Number: LS-XRLA40R

Available immediately

Price after login

Vertical limit switch in black and yellow: black base with a yellow front plate, secured at the top with a screw. A round yellow plunger protrudes from the top of a black spring mechanism, actuating contact 1S/1Ö.

Position switch, dome-type plunger, 1 NO / 1 NC, spring-loaded

LS-11/LS Base Unit - Limit Switch, Roller Lever, Plastic, 1 Normally Open/1 Normally Closed, Slow-Release Contact, Eaton Base unit, expandable, plastic Y7-266109

Item Number: LS-11

Available immediately

Price after login

A black, cylindrical threaded component surrounded by silver hex nuts and black washers. Attached to the top by a pin is a small, black roller mechanism—presumably a limit switch or sensor.

Roller tappet, center mounting, plastic

For installation in an M18x1 hole in the housing wall or mounting plate Y7-114025

Item Number: LS-XZRS

Available immediately

Price after login

Adjustable roller lever, d=18mm, plastic

Eaton Moeller® Series LS Adjustable Roller Lever, d=18mm. Y7-266127

Item Number: LS-XRLA

Available immediately

Price after login

A small, upright object with a dark gray, cube-shaped base. A silver, spiral-shaped metal spring protrudes from it. At the top is a slender, yellow rod with a rounded tip; possibly a flexible marking rod.

Spring rod, plastic

Eaton Moeller® Series LS spring-loaded rod. Do not use as a safety limit switch. Use only in conjunction with a snap-action switch. Y7-266133

Item Number: LS-XS

Available immediately

Price after login

Dark gray plastic dome-shaped ram with central mounting. Features a central threaded rod, two silver hex nuts, and additional plastic threaded sections for installation. Sturdy rectangular block at the bottom.

Dome-head plunger, center mounting, plastic

For installation in an M18x1 hole in the housing wall or mounting plate Y7-114024

Item Number: LS-XZS

Available immediately

Price after login

A rectangular, dark gray block with a smooth surface. At the top, slightly to the left of center, is a small round wheel with a bright yellow tire and a dark metallic ball bearing. White background.

Roller pushrod, plastic

Eaton Moeller® LS series roller tappet. Y7-266125

Item Number: LS-XP

Available immediately

Price after login

A slender, white plastic operating rod, rounded at the top, is inserted vertically into a dark, rectangular base. A narrow gold-colored ring connects the rod and the base. The base is solid with a slightly beveled edge.

Actuator rod, plastic

Eaton Moeller® LS Series Rod Lever. Y7-290190

Item Number: LS-XOR

Available immediately

Price after login

Adjustable roller lever, d=30mm, plastic

Eaton Moeller® Series LS Adjustable Roller Lever, d=30mm. Y7-266128

Item Number: LS-XRLA30

Available immediately

Price after login

Metal adjustable roller lever from the Eaton Moeller LSM series with an 18 mm roller attachment at the top, mounted on a black housing with a screw. A separate silver coil spring is located next to it. For precise mechanical movement.

Adjustable roller lever, d=18mm, metal

Eaton Moeller® Series LSM Adjustable Roller Lever, d=18mm, metal. Y7-266160

Item Number: LSM-XRLA

Available immediately

Price after login

A vertical, cylindrical metal rod protrudes from a small, black, rectangular housing. It is attached to the housing with a silver clamp. The housing is centered, and the background is pure white.

Rod lever, metal rod

Eaton Moeller® Series LS Rod Lever, metal rod. Y7-266133

Item Number: LS-XRRM

Available immediately

Price after login

Black plastic angle roller lever with a bright yellow roller at the top. A flat base supports the angled arm, at the tip of which the yellow roller is mounted so that it can rotate freely. Serves as an actuator for industrial switches.

Angled roller lever, plastic

Eaton Moeller® LS Series Angled Roller Lever. Y7-266124

Item Number: LS-XLA

Available immediately

Price after login

A slender white rod stands vertically and is held in place at the bottom by a small black rectangular component. A metal clip with a screw secures the rod. On the left, a small shiny coil spring is attached horizontally.

Rod lever, plastic rod

Eaton Moeller® Series LS Rod Lever, plastic rod. Y7-266131

Item Number: LS-XRR

Available immediately

Price after login

Black metal angle roller lever with a rectangular base and an upright, slightly angled arm that supports a shiny, silver cylindrical wheel. Sturdy, slightly textured, typical industrial component.

Angled roller lever, metal

Eaton Moeller® Series LSM Angled Roller Lever, Metal. Y7-266157

Item Number: LSM-XLA

Available immediately

Price after login

Compact black plastic roller lever with a bright yellow roller, mounted horizontally between two black brackets. Lever sits on a square base and is secured with two silver screws. Short and sturdy design.

Roller lever, short, plastic

Eaton Moeller® Series LS Roller Lever, Short. Y7-290177

Item Number: LS-XLS

Available immediately

Price after login

Close-up of a mechanical component with a black base and a swiveling arm. At the top of the arm is a silver roller; opposite it, a spiral-shaped metal spring protrudes. A Phillips-head screw secures the pivot point.

Swing lever, metal

Eaton Moeller® LSM Series Swivel Lever, Metal. Y7-266159

Item Number: LSM-XRL

Available immediately

Price after login

A metal spring and a black L-shaped component with a yellow wheel held in place by a screw. Another screw is visible at the bend of the black component. The spring is positioned to the left of the component.

Toggle lever, plastic

Eaton Moeller® LS Series Swivel Lever. Y7-266126

Item Number: LS-XRL

Available immediately

Price after login

Dark gray, sturdy caster assembly with a solid black wheel mounted on a sturdy metal bracket. The bracket sits on a rectangular base. Several silver screws hold the parts together, indicating industrial use.

Roller lever, large, plastic

Eaton Moeller® Series LS Roller Lever, Large. Y7-290178

Item Number: LS-XLB

Available immediately

Price after login

A dark, rectangular block with a rough, matte surface is in the foreground. A small transparent roller with a dark bearing and a silver axle sits at the top center. The block is tilted slightly backward.

Roller tappet, metal

Eaton Moeller® LSM series roller tappet, metal. Y7-266158

Item Number: LSM-XP

Delivery time on requestk

Price after login

Compact yellow-and-black limit switch with a yellow pushbutton on top. "EATON" is embossed on the yellow front. The black side displays "LSM-02," IP66/67, "Made in Germany," and certifications.

Position switch, dome-type plunger, 1 NO / 1 NC, spring-loaded

Base unit LSM-11D - Limit switch, plunger, metal, 1 NO + 1 NC, standard contact, Eaton base unit, expandable, metal Y7-266149

Item Number: LSM-11D

Delivery time on requestk

Price after login

Metal roller lever with a black, textured base. A swiveling black lever arm supports a shiny, cylindrical roller made of silver-colored metal. Two gold-colored bushings are visible. Sturdy construction.

Long roller lever, metal

Eaton Moeller® LSM series roller lever, metal. Y7-266156

Item Number: LSM-XL

Delivery time on requestk

Price after login

Position switch, dome-type plunger, 1 NO / 1 NC, spring-loaded

LS-11S Base Unit - Limit Switch, Piston, Plastic, 1 Normally Open + 1 Normally Closed, Snap-action Contact, Eaton Base Unit, Expandable, Plastic Y7-266105

Item Number: LS-11S

Delivery time on requestk

Price after login